Beli nozzle di monotaro.id

Air flow rate can be adjusted at the base of the nozzle. Nozzle for air duster.

Steel siphon-feed blasting nozzle kits include a nozzle, air jet, and other components that work together on siphon-feed blasting guns. Steel blasting gun nozzles are used in general blasting, though they can wear quickly when used with aggressive, hard abrasives.

-Compared to the existing straight type, the nozzle moves universally at the angle of 45° and can spray with high pressure to a wide range.-The spraying direction can be maintained compared to the resin nozzle.

INGCO Hose Nozzle Metal // Semprotan Air Steam Cuci Mobil Motor

A diaphragm type check valve to prevent dripping and a new lock cap that prevents the cap from loosening and is easy to remove are adopted.

Usage:Dropped rust, Paint peeling, Surface treatment of metal, glass, plastic etc.

33

-Angle of injection port is adjustable within the range of ±35°.-Compared to resin nozzles, the position can be maintained even at high flow rate.

It is excellent in mechanical strength, fatigue resistance, dimensional stability, oil resistance, chemical resistance.

The rubber at the tip of the nozzle reduces scratches on the work piece, allowing blow operation by pressing. Does not hurt the work area.

Nozzle Tester Model s60H( Top Quality ) Alat Test Nozzle Mobil / Alat Uji Nozzle Truk / Alat BengkelSpesifikasi-Pengujian injeksi-nozzle menjadi mudah.-The Bosch Nozzle Tester adalah unit yang sangat serbaguna:-Pengujian dan penyesuaian tekanan pembukaan injeksi nosel-Penilaian semprot injeksi mengenai bentuk dan atomisasi (image injeksi semprot)-Memeriksa kebocoran di saluran injeksi, dan memeriksa sifat obrolan di pemegang nosel dua musim semi, melangkah pemegang nozzle, dan UI / UP aplikasi.-Dibandingkan dengan model pendahulunya EFEP 60H, karena cepat membaca akurasi yang lebih baik (1 bar), dan meningkatkan akurasi pengukuran manometer, kemungkinan ketidakakuratan pengukuran secara keseluruhan telah meningkat pada EPS 100 dari +/- 4 bar +/- 2,4 bar. Ini berarti bahwa bahkan kebocoran yang paling menit dapat dianalisis dan dicegah sehingga kemungkinan goyang mesin saat idle dapat dikesampingkan. Perbaikan desain telah mengakibatkan kebocoran dalam dari EPS 100 jauh lebih rendah dibandingkan dengan EFEP memiliki keuntungan bahwa dalam rangka pengujian kebocoran pada pemegang nosel dua musim semi dan Unit injector dll, tekanan yang dihasilkan tidak drop.

Drum pump nozzles are flow control devices that connect to the end of a drum pump discharge hose. They have a spout where fluid exits the nozzle and a trigger control for starting, stopping, and regulating the rate of flow. These nozzles minimize product waste and reduce wear on pump motors by allowing flow to be controlled without having to turn the pump on and off. They're commonly used for dispensing fuels and automotive fluids.

Gasoline nozzles control the flow of gasoline and help with dispensing. They have an outside nozzle diameter compatible with the fuel tank of gasoline-powered vehicles.