Beli pitting di monotaro.id

The Rubbermaid Commercial Tilt Truck offers industrial strength construction that transports heavy loads with ease.

The Rubbermaid Commercial Domed Lid keeps materials secure inside Rubbermaid Commercial tilt trucks.

Gear Oil GX series is an extreme-pressure automotive gear lubricant formulated from solvent refined mineral base oils and containing special sulphur phosphorus additives to produce a superior gear lubricant with extreme pressure characteristics and thermal stability for automotive applications over a wide range of temperatures and heavy duty conditions.

The Following measurements are possible in either inches or milimeters:- Angle of preparation, 0 degree to 60 degrees- Excess weld metal (capping size)- Depth of undercut- Depth of pitting- Fillet weld Throat size- Fillet weld length- Misaligment (high-low)

CeRam-Grout GC is a technically advanced ceramic epoxy material that has been designed for patching severe pitting in steel, spalling and cracks in concrete floors and walls where corrosion and chemical attack are problems. CeRamGrout GC may be applied in thickness of 15 mils (375 microns) to 3/4inch (19mm) thick. CeRam-Grout GC is 100% solids by volume and provides a non-shrinking surface after application. Part A (Base) is gray in color and Part B (Curing Agent) is white in color so that when mixed in the right proportions, the blend will produce a gray grouting compound with no visible streaks. CeRam-Grout GC is formulated for high abrasion, erosion and corrosive environments. It may be used to repair corroded metal pitting, cracks in concrete or spalling of concrete where a highly wear-resistant surface is desired. CeRam-Grout GC is a superior modified epoxy resin system that is filled to maximum capacity with ceramic materials and cured by the addition of a proprietary curing agent. CeRam-Grout GC is a high-build material that reduces labor costs. It is designed as a one-coat application to repair severely corroded and pitted structures and tank bottoms. It may be used to repair corroded metal pitting, cracks in concrete or spalling of concrete where a highly wear-resistant surface is desired. CeRam-Grout GC is a superior modified epoxy resin system that is filled to maximum capacity with ceramic materials and cured by the addition of a proprietary curing agent. CeRam-Grout GC is a high-build material that reduces labor costs. It is designed as a one-coat application to repair severely corroded and pitted structures and tank bottoms. It may be used as a stand-alone system or in conjunction with CERAM-KOTE COATINGS' CeRam-Kote 54 ceramic epoxy coating system.

NSW-316 is a stainless steel electrode designed for welding 18/8/Mo stainless steels, AISI 316, 316L, and 317 austenitic stainless steelFeatures austenitic and corrosion-resistant weld deposit of low carbon 19% Cr-12% Ni-2.8% Mo, which ensures against intergranular carbide precipitation, good resistance to pitting corrosion, and crevice corrosion by non-oxidizing acids intended applications where service temperatures do not exceed 400ºCHigh deposition rate and efficiencySelf-peeling slagThe finished welds exhibit a slightly concave shape with a good cosmetic appearance and requires little to no post weld dressing.Ideal for both fillet and butt welding applications

PERTAMINA COOLANT merupakan pendingin premium, campuran 30% konsentrat dengan 70% air murni tanpa ion mineral yang diformulasikan dari ethylene glycol dan aditif yang seimbang.PERTAMINA COOLANT memiliki kandungan silikat yang rendah, bebas nitrit, amina dan fosfat.Teknologi pendinginan itu meningkatkan kemampuan sistem pendingin, meningkatkan efisiensi, kinerja dan umur mesin.PERTAMINA COOLANT adalah pendingin radiator mesin yang memiliki titik didih tinggi sehingga dapat mencegah mesin dari panas yang berlebih. Produk ini menstabilkan suhu mesin,melindungi logam sistem pendingin mesin seperti kuningan, tembaga, baja, besi cor, dan alumunium dari korosi.TINGKATAN MUTUPERTAMINA COOLANT memenuhi tingkatan mutu Internasional ASTM D 3306 dan JIS K 2234.KEUNGGULAN:Sifat perpindahan panas yang lebih baik.Siap digunakan dan tidak membutuhkan pengenceran untuk pengisian pertama dan penambahan.Cocok dengan filter sistem pendingin.Titik didih yang tinggi untuk mencegah mesin kendaraan dari pemanasan berlebih.Mempertahankan suhu mesin kendaraan stabil untuk menghasilkan kinerja mesin yang optimum.Memberikan perlindungan yang lebih baik terhadap korosi, deposit dan pitting untuk campuran logam yang digunakan pada sistem pendingin.Mencegah pembusaan dan kavitasi dengan mengurangi pembentukan gelembung udara atau uap.PENGGUNAAN :PERTAMINA COOLANT disarankan digunakan untuk pendingin mesin kendaraan dan sistem pendingin dengan tugas ringan.

E316 stick welding electrodes are used for joining grades 316, 316L, 316LN, 316N, 317L, and 444 stainless steel.

These hardfacing alloys resist abrasion and impact. They are suitable for overlaying surfaces that are exposed to both heavy pounding that can chip or crack the surfaces and gritty materials that can grind the surfaces. These alloys are commonly used for hardfacing equipment such as bulldozer blades, pump housings, and dredge cutter teeth.

ER80S-D2 TIG rods are used for welding manganese-molybdenum (MnMo) steel alloys. They are suitable for welding rusty or dirty metals. They are also suitable for applications where porosity is a concern or where the base metal being welded contains high levels of sulfur or carbon. These rods are commonly used for welding construction equipment, pipe, and trailers.

Sapu Injuk Kipas Besar Dragon- Nyaman Digunakan- Tahan lama.- Sapu mudah dibersihkan.- Sapu mempunyai nylon yang kuat, awet, dan tidak mudah rontok.- Dapat membersihkan dengan efektif, sapu ini mampu menjangkau sudut bagian bawah tempat tidur dan perabot rumah, serta dapat juga digunakan sebagai pembersih sarang laba-laba pada langit-langit rumah.

Typical Applications:- Petrol Chemical Equipment Manufacturing - Power Generation Construction - Food & Beverage Equipment - Shipbuilding & Offshore

Shell GadusS2 V220 2High Performance Multipurpose Extreme Pressure GreaseShell Gadus S2 V220 greases are high quality multipurpose, extreme-pressure greases based on a blend of high viscosity index mineral oils and a lithium hydroxystreate soap thickener and contain extreme-pressure and other prov additives to enhance their performance in a wide range of applications. Shell Gadus S2 V220 greases are designed for multipurpose grease lubrication of rolling element and plain bearings as well as hinges and sliding surfaces such as those found in throughout most industrial and transport sectors.Main ApplicationsShell Gadus S2 V220 1 grease is designed for:- Heavy duty bearings served by centralised dispensing equipment.- Heavy duty plain and rolling element bearings operating under harsh conditions including shock loading in wet environments.- Operation over the temperature range -20°C to 100°C for bearings operating at 75% of the maximum rated speed (Can withstand up to 120°C intermittently).Specifications, Approvals & RecommendationsFor a full listing of equipment approvals and recommendations, please consult your local Shell Technical Helpdesk, or the OEM Approvals website.Health, Safety & Environment- Health and SafetyShell Gadus S2 V220 Grease is unlikely to present any significant health or safety hazard when properly used in the recommended application and good standards of personal hygiene are maintained.Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet.- Hydraulic Brake Rubber ComponentsCare should be taken to ensure that the grease does NOT come into contact with hydraulic brake rubber components.- Protect the EnvironmentTake used oil to an authorised collection point. Do not discharge into drains, soil or water.Additional Information- Re-greasing IntervalsFor bearings operating near their maximum recommended temperatures, re-greasing intervals should be reviewed.- AdviceAdvice on applications not covered here may be obtained from your Shell representative.

The ZX-1 & 2 are basic fixed velocity gauges that require no special training to operate. Calibration is done by simply scrolling to a known material velocity, or selecting a common material from a list of material types in the ZX-2. The gauges were designed and built to withstand the roughest industry conditions, are affordable, and backed by a 5 year limited warranty. If you're looking for a quality instrument to reliably meet or exceed your application expectations, look no further. Applications : - Corrosion & Pitting : Boilers. - Tube & Pipe : Glass. - Tanks : Variety of Applications. TRANSDUCER : - Dual element (transmit and receive). - 1 to 10 MHz frequency range. - Locking quick disconnect LEMO connectors. - 4 foot cable. - Custom transducers available for special applications. POWER SOURCE : - Two 1.5V alkaline, 1.2V NiCad, or 1.5V Lithium AA cells. - Typically operates for 45 hours on alkaline and 23 hours on NiCad. - Low battery indicator on display. Unit turns off automatically when battery is too low to operate reliably. DISPLAY : Multi-function 7 segment 4.5 digit liquid crystal display with 0.500 in digit height. Two 0.125 in14 segment fields for labels and values, and one 7 segment field for labels and values. Additional icons to indicate features and modes. Backlight is selectable on/off/auto, and selectable brightness (Lo, Med, Hi) options. Bar graph indicates stability of reading. MEASURING : Velocity Settings: ZX-1 adjustable on keypad. ZX-2 adjustable on keypad and selectable from 8 factory presets and 2 programmable custom velocity options. Velocity Chart in./mm. 1. Steel 4340 .2330/5918. 2. Stainless 303 .2230/5664. 3. Aluminum 2024 .2510/6375. 4. Cast Iron .1800/4572. 5. Plexiglass .1060/2692. 6. PVC .0940/2388. 7. Polystyrene .0920/2337. 8. Polyurethane .0700/1778. 9. Custom.

Applications:- Designed for the welding of common 18-8 austenitic stainless steels such as type 302, 304, 304L & CF-8- Petrol Chemical Equipment Manufacturing - Power Generation Construction - Food & Beverage Equipment- Shipbuilding & Offshore - Transportation Equipment Manufacturing

The Castrol Alpha SP gear oil range of high quality lubricants are based upon highly refined mineral oil, enhanced with an extreme pressure additive technology providing good thermal stability and high load carrying capacity. The extreme pressure additive system not only provides high load carrying capacity, but was designed to provide microscopic wear protection. Microscopic wear protection, also known as micropitting protection, is critical in preventing destructive wear at the micro level therefore extending gear life and meeting the evolving demands of smaller and higher output gear boxes.