Beli extractor di monotaro.id

Recommended for simple, low cost removal of broken screws, bolts etc, without damaging the threads of the component. 4 Piece Sizes: No. 2, 3, 4 and 5. 6 Piece Sizes: No. 1, 2, 3, 4, 5 and 6.

Screw Extractor:No.1= 1/8inch~1/4inch (3~6mm)No.2= 1/4inch~5/16inch (6~8mm)No.3= 5/16inch~7/16inch (8~11mm)No.4= 7/16inch~9/16inch (11~14mm)No.5= 9/16inch~3/4inch (14~19mm)No.6= 3/4inch~1inch (19~25mm)

Tekiro Tap Balik Set 6 pcs adalah salah satu jenis Obeng yang termasuk kedalam kategori Screwdriver atau biasa disebut juga dengan istilah obeng minus, obeng plus, obeng set atau obeng kembangSuatu alat memiliki ulir yang bisa membuat tep / lubang derat halus maupun kasar, Dengan ukuran sesuai kebutuhan.Fungsi : Untuk membuat suatu lubang derat halus ataupun kasarMaterial : Chrome VanadiumDimensi : 1/8mm 1/4mm 1/4mmkonten produk 6pcs : Tap Balik1/8 inch-1/4 inch(M3-M6)1/4 inch-5/16 inch(M6-M8)5/16 inch-7/16 inch(M8-M11)7/16 inch-9/16 inch(M11-M14)9/16 inch-3/4 inch(M14-M18)3/4 inch-1 inch(M18-M25)

Usage:To pull out broken bolts and pipes.

Drive into end of broken pipe or fitting.Use tap holder or wrench on extractor to turn out broken part.Size stamped on extractor refers to drill bitsize to be used with that extractor. Set Content : Screw : 1/8inch, 3/16inch, 15/64inch, 5/16inch, 3/8inch, 15/32inch, 9/16inch, 21/32inch, 13/16inch, 1-1/16inch

Bolts that are broken in the screw holes can also be removed without damaging the screw holes.* Cannot be used for hardened bolts and stainless steel bolts.

Rang: M3-M25N.1 (3-6mm),N.2 (6-8mm), N.3 (8-11mm), N.4 (11-14mm), N.5 (14-18mm), N.6 (18-25mm)

- Extracts broken screws from 1/4inch to 1/2inch diameter, - Storage case packaging.

Set contents for extensive applications. For removing of threaded bolts, studding and screws. No damage of the thread. Only negligible enlarging of the threaded bolt through special profile extractor pin. For screws and bolts M5-M16. Special tool steel. In durable plastic storage case.

These high strength, industrial quality screw extractors are ideal for a variety of trade uses. They are primarily recommended for simple, low cost removal of broken screws, bolts and other fasteners without damaging the threads of the component. Available in a range of sizes to suit your needs.Features and Benefits- Available in a variety of sizes to suit your specific needs- Possesses a left hand helix to easily remove screws- Simple yet effective way of removing broken fasteners whilst ensuring the thread of the component is not damagedTypical Applications- Construction- Engineering- DIY

Kapasitas muatan berlebih yang tinggi untuk pengerjaan terberatDukungan tambahan untuk pemotongan materialPerlindungan operator maksimal dan meminimalkan getaran

It cannot be used for hardened bolt and stainless bolt.

• Forged steel - Quenched & Tempered.• Working Load Limits shown are for in-line pull. For angle loading, see Warnings & Applications.• Fatigue rated at 1-1/2 times the Working Load Limit at 20,000 cycles.• Recommended for in-line pull.• Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, these bolts meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.

Usage:Spring used in the direction to pull.

Produk ini juga sering disebut dengan Tap Balik