Beli dial test di monotaro.id

Horizontal dial test indicators are built with the dial positioned on the side of the gauge body facing out. They are commonly used in applications where the indicator will not rotate. When the application does involve rotation, such as use on a machine spindle, operators may choose a model with a half-shaded dial face to facilitate mirror readings.

Dial Test Indicator> Jeweled bearing> Carbide contact point> Two measuring directions> Anti magnetic body> Supplied with 2 clamps 4mm & 8mm> Optional accessory; Style

Various measurements such as dimensions of workpieces, parallelism, centering, runout of lathe workpieces, etc. can be done. Dimensions of workpieces, parallelism, centering

The Mitutoyo digital caliper delivers accurate, repeatable outside dimension, inside dimension, depth and step measurements with accuracy and unrestricted speed.

Mitutoyo's Magnetic Stands accept all dial indicators and dial test indicators. The On-Off switch offers instant mounting and dismounting without any adverse effect to the indicators or workpiece surface.

-Can fasten various holding posture instantly with lock knob.

Dilengkapi basis magnetik kuat dan fleksibilitas posisi untuk menopang dial indicator. Diperlukan dalam pengukuran presisi dan pengaturan mesin.

It is with safety stopper which can be adjusted. It is a tool for expanding the piston ring when detaching the piston ring or attaching it to the piston. With this, work will be easier. It is convenient with an adjustable safety stopper. For removing and installing the piston ring

This is a dial test indicator (lever type) which offers you the following benefits:- Drastically enhanced durability, sensitivity and visibility- Glare-free flat crystal face allows easy reading of graduations.- O-ring seal on the bezel has the effect of providing smooth rotation and prevents dust and oil from penetrating through to the dial face.- Multi-layer coatings on the crystal

This product can be adjusted at any direction and position, and can be made fixed by trimming device and swallow tailed slot clamp, through hydraulic force.

With four magnetic faces, one at 45 Degrees. Medium duty with standard clamp. ­Mounts: 1/4inch I/D lug, stem/spigot diameter: 5/16inch. Base dimensions: 48 x 44 x 51mm. Column height x diameter: 185 x 12mm. Crossbar length x diameter: 150 x 6.3mm. Clamp ring: 8mm. Magnetic pull: 30kg.

This is a standard dial indicator. It offers you the following benefits:-Bezel clamp and lifting lever (optional) can be attached to either right or left side. They can be easily installed and removed without tools.-No through screw holes on the frame as well as the use of an O-ring prevents water or oil penetration.

Engineering plastic shade and base provides complete insulation for maximum operator safety.Power source available: Any voltage on customer's request. Such as 110V, 220V, 240V, 380V, 415V.Transformer built in base.Accept 20, 35 and 50 watt bulb. Includedwith 20 watt bulb, 35 and 50 watt bulb on request.Furnished with 1.8 meter (70") cord.Available with magnetic base. (optional)Engineering mounting angle plate. (optional)Double shades designed permits fast heat dissipation.

Kap Lampu Flexible dengan Magnetic Base (Tanpa Lampu)