Beli msa v gard di monotaro.id

The MSA V-Gard Helmet, with its distinctive trademark “V” design, is a world recognized brand known for comfort, quality, and durability. MSA has sold well over 100 million V-Gard Helmets since its introduction – so many in fact, that the iconic “V” design has been a mainstay for many years on even the toughest worksites. When you want the best comfort, quality and durability worn by millions across the globe, you need to buy the original MSA V-Gard Helmet, settle for nothing less.

General purpose front-brim (Type 1, Class E) hard hats are non-vented and they have a front brim to protect the face from sun, reduce glare, and help shed rain. Type 1, Class E hard hats protect wearers from vertical impacts and high-voltage conductors (up to 20KV). These hard hats are used by construction workers, road crews, and other workers as required by OSHA.

For industrial workers, the V-Gard Cap-Mounted Hearing Protection Line delivers enhanced comfort and top-of-the-line performance with upgrades in fit and style—all without compromising the quality expected from the legendary V-Gard brand. Designed to work with MSA’s industry-leading hard hats and accessories, the new earmuff line offers enhanced comfort while providing the performance level and protection needed to get the job done.The Noise Reduction Rating (NRR) is third-party tested in accordance with: - ANSI S3.19-1974- ANSI S12.6-2008- CSA Class A- EN 352-3:2002- AS/NZ S1270:2002

Helm MSA Lokal bersertifikat SNI telah melewati uji coba penelitian sesuai standar yg telah ditetapkan untuk keselamatan kerja.REG IDM 000206153 Helm Keselamatan Industri No.Sert : 3759.671 / 13.340 / XI / 2017Certificate KAN (Komite Akreditasi Nasional)Uji Redam Kejut Untuk Perlambatan Yang Diteruskan Pola Kepala Uji- Suhu Rendah -10 C, 4 Jam : Maks 100 G : Hasil 53,2 G- Suhu Tinggi (50 2)C, 4 Jam : Maks 100 G : Hasil 55,6 G- Kondisi lembab (20 2)C, Laju semprot 1 L / Menit 4 jam : Maks 100 GUji penetrasi -20C selama 4 jam beban pemukul 3 KG tinggi 1000 M : Hasil tidak menyentuh pola kepala uji dan tidak tembusKetahanan nyala api selama 5 detik : Hasil tidak terbakarUji isolasi listrik kebocoran arus listrik pada tegangan 440V-1200V,60HZ : Maks 1,2 MA : Hasil 0,3 MAUji kekakuan arah samping : Pembebanan melintang dari 100N hingga 430N selama 30 selama 30 detik- Deformasi arah samping : Maks 40 (mm) : Hasil 38 (mm)- Deformasi sisa : Maks 15 (mm) : Hasil 7 (mm)

- VENTILATIONMaximum ventilation thanks to the ten air intakes. The air intakes and the internal outflow channels guarantee effective breathability.- 2DRYThis high-tech and maximum comfort fabric dries very quickly, encouraging the expansion and dispersion of moisture to the outside and leaving a pleasant feeling of freshness.- LAMP CLIPSHelmet equipped with strong nylon external lamp carrying clips, that are compatible with all headlamps with elastic bands on the market.- AIR GRIDThe air intakes are equipped with an anti-intrusion grille, that prevents entry of debris whilst maintaining breathability.- MICROMETRICAL ADJUSTMENTThe micrometrical size regulation mechanism positioned at the rear of the helmet provides quick and precise adjustment, even when wearing gloves.- RING TO HOOKFitted with a special loop on the chin strap which allows the helmet to be connected to the harness.- EARMUFFS FITTINGProvided with integrated slot for earmuffs with bayonet attachment.- VISOR ATTACHMENTProvided with attachment for fitting visors. Compatible with all KASK visors.- CHINSTRAP EN 397Four point chinstrap with Quick release fastening and opening in conformity with EN 397. Provided with lateral divider for adjusting the length of the straps.

This hip-length jacket offers heavy-duty YKK zips and is Polar Fleece lined for warmth. Wind proof (TPU membrane), water repellent, and breathable.- Material : 93% Polyester/7% Spandex- Technologies : Oil Resistant Garment, Windproof Garment, Water Resistant Garment