Beli harga penetrant di monotaro.id

WELD CHECK PENETRANT, 10.5 WT OZModel#: 03106DESCRIPTION:A red colored liquid penetrant for the non-destructive testing of surfaces and structures.APPLICATIONS:Non-destructive inspection of materials, parts, assemblies, equipment, surfaces or structures.

FREEZE-OFF SUPER PENETRANT, 11.5 WT OZModel#: 05002DESCRIPTION:A unique formula that immediately drops the temperature of the area in direct contact with the spray. The freezing effect cracks rusted surfaces, allowing Freeze-Off to reach deeper & work more effectively than other penetrants. Low VOC Formula.APPLICATIONS:Automobiles, boats & watersports equipment, household items, plumbing fixtures, agricultural equipment and sporting goods

ERGENE ER. 602Spot Check PenetrantERGENE US.FormulatedSpot Checks PenetrantSalah satu komponen dari spot checker yang mempunyai daya penetrasi terhadap retak pada permukaan metal.Sehingga dapat mendeteksi keretakan, kebocoran dengan efficient dan effective pada mesin - mesin, pipa, plat yang dilas dll.produk berbahan kimia lainnya

General Description : Spotcheck SKL-SP1 is a solvent removable (or post emulsifiable) red colour contrast penetrant. SKL-SP1 exhibits outstanding penetrating characteristics which provide for maximum reliability in locating surface-open flaws and discontinuities. SKL-SP1 can be used over the entire spectrum of industrial applications, where a visible penetrant inspection system meets the requirements for surface-open flaw detection. Applications : Typical applications include castings, forgings, leak testing, welds and general metal work. SKL-SP1 has also been successfully used on non-porous ceramics and similar materials. However it is not recommended for the inspection of plastic materials, as it may stain, soften or even dissolve the base material under test. Composition : SKL-SP1 is composed of a blend of petroleum distillates, plasticiser and an oil soluble organic red dye.

A no-compromise penetrant that attacks corrosion to free corroded fasteners & mechanical components. A super-fast, powerful, concentrated penetrating solvent that loosens rust scale & corrosion. Instantly penetrates minute & tightly fitted crevices.APPLICATIONS:Nuts and bolts, pins, screws, bushings, clips, hinges, snaps, lugs, caps, locks, washers and sliding mechanisms.WHERE TO BUY

M-One multipurpose penetrant bisa dipakai sebagai pelumas. Produk ini bisa di aplikasikan diberbagai macam area seperti alat elektronik, busi motor, juga untuk barang sehari - hari seperti engsel, kunci, mur dan baut.Anti KonsletProduk Berkualitas

To protect all metal parts affected with rust.

Melindungi metal dari karat dam korosi. Melepaskan mur dan baut yang berkarat dengan kemampuan penetresi yang cepat. Menghilangkan bunyi derit akibat gesekan. Membersihkan kotoran, oli, aspal, dan debu.

Spotcheck® SKD-S2 adalah pengembang pelarut non-halogenasi yang memenuhi persyaratan utama untuk paduan khusus dan aplikasi nuklir. Spotcheck® adalah suspensi siap pakai dari partikel-partikel putih yang berkembang dalam pelarut cepat kering. Ini menghasilkan lapisan putih buram, yang memberikan latar belakang kontras yang sangat baik untuk indikasi penetran.

Spot Check Developer yang berfungsi untuk memperjelas keretakan pada permukaan metal yang sangat halus. Digunakan setelah pemakaian ER.602 Spot Check Penetrant cairan ini akan mengangkatnyakeatas permukaan logam sehingga akan terbentuk jalur keretakan yang berwarna Putih.

Fast reliable method for visually inspecting and spot-checking surfaces of welds, exotic alloys or standard metals, highly stressed structural members, critical castings, shafts, gears, spindles, and any other hard part where identification of surface flaws is essential. Detects flaws such as cracks, pin holes, welding laps and porousness either during manufacture or on site. A three part system. SFD-501C is a cleaner. SFD-502C is a dye penetrant. SFD-503C is a developing fluid that reacts with the dye in SFD-502C to show small cracks in the weld. Each part supplied in an ozone friendly 500ml aerosol. Flaw Detector Developer SF3-500B White film to highlight any faults which have been detected when using Flaw Detector Penetrant. The product should be removed using Flaw Detector Cleaner Spray once cracks have been found and marked. Size: 500ml.

Spot Check Cleaner yang berfungsi untuk membersihkan permukaan metal untuk dapat mendeteksi keretakan yang halus. Digunakan pertama kali sebelum proses pengecekan agar permukaan logam bersih dari segala kotoran dan didapat hasil yang maksimal.