Beli metal cutting wheel di monotaro.id
Kami Menampilkan Rekomendasi Kami Untuk Anda! Anda Bisa Membelinya Kapan Saja di monotaro.id
- KINIK Mata Gerinda Potong Ultra Thinatribut:
- Size: 100 x 1.6 x 16
- BOSCH Mata Gerinda Potong Standar Metalatribut:
- Diameter (mm): 355
- Bore Diameter (mm): 25.4
- Thickness (mm): 3
- Pennant Thermodynamic Steam PT11Deskripsi:Thermodynamic steam trap with inbuilt strainer in full stainless steel construction, best suited for header and main line drains and drip legsINSTALLATION:The trap will operate in any position but the preferred installation is in a horizontal position with the disc cap on the top. Full port isolating valves should be installed upstream and downstream of the trap.MAINTENANCE:This trap can be maintained without disturbing the piping connections. Ensure that the trap is isolated - upstream and downstream - before attempting to dismantle it. ALLOW THE TRAP TO COOL BEFORE DISMANTLING.For trouble-free performance, periodic cleaning of the disc, seat and strainer screen is recommended. Do not use abrasive/corrosive media for cleaning. Only the disc and seat are subject to wear. A worn disc can be replaced. Slight seat wear can often be corrected by resurfacing on a lap plate.IMPORTANT:The trap should be installed as close as possible to the line to be drained. For new pipelines, ensure that the lines are properly flushed, prior to fitting the traps, to avoid strainer choke-up.OPTIONAL FITTINGS:ISOTUB: An insulating cover reduces the effect of excessive heat loss resulting from low ambient temperatures, wind, rain, etc. Blow Down Valve: When the blow down valve is opened, loose material collected in the strainer is purged.AVAILABLE SPARES:Disc, Strainer Screen (Packet of 5), Blow Down Valve, Isotubatribut:
- Connection: Screwed (NPT/BSPT/BSP) Flanged*, Socket Weld *End connection flanges of ASTM A105 forged carbon steel are welded on.
- Max. Allowable Pressure (psig): 600
- Maximum Allowable Temperature (°F): 800
- Cold Hydro Test Pressure (psig): 900
- Minimum Differential Pressure For Satisfactory Operation (Psi): 3.5
- BOSCH Mata Gerinda Potong Metal Best RangeDeskripsi:- Cocok untuk bahan bangunan umum seperti beton, batu bata, granit, pipa besi cor dan logam.- Kecepatan potong yang sangat baik berkat Speed Slots untuk mengurangi gesekan samping.- Agar mata gerinda tahan lama, gunakan pada material dengan segment height maksimal 15 mm.atribut:
- Wheel Shape: Straight
- KINIK Mata Gerinda Surfaceatribut:
- Abrasive Material: White Aluminium Oxide
- Union Sikat Kawat Mangkok Twist KnotDeskripsi:Sikat Kawat Mangkok Twist Knot (untuk gerinda tangan berkecepatan tinggi)Sikat twist knot ini dirancang untuk membersihkan permukaan yang susah dibersihkan. Sikat ini tahan korosi dan desain twist knot sikat ini mempercepat perontokkan karat, cat, dan kerak. Bisa digunakan dengan gerinda tangan. Cocok untuk menghilangkan kerak, deburring, dan persiapan/pembersihan welding seam.atribut:
- Material: Steel 0.5mm
- INGCO Wire Cup BrushDeskripsi:INGCO Wire Cup Brush (Bor 3inch) // Kuningan Sikat Kawat Mangkokatribut:
- Size (mm): 75 (3inch)
- NORTON Cup BrushDeskripsi:This crimped wire cup brush offers high brushing flexibility for larger, flat surfaces. Use to remove rust, paint, and scale.atribut:
- Abrasive Material: Carbon Steel
- Arbor Hole Size: 5/8inch-11
- Item: Cup Brush
- Abrasive Shank Size (inch): No Shank
- Bristle Type: Knotted Wire
- Item - Cup Brushes: Cup Brush
- Mounting Type: Arbor Hole
- Union Steel Wire Cup Brushes (CA)Deskripsi:CA-Type Cup Brushes (electric tools), Aggressive type.
- CUMET Sikat Kawat Mata Gerinda Crimped Wire Cup BrushesDeskripsi:Wire Brush/Sikat Kawat Mata GerindaCrimped Wire Cup Brushes 3 inchCup yang tebal membuatnya lebih stabil dan kuat saat bekerjaAda sedikit ruang di antara setiap simpul yang dapat meningkatkan efisiensi saat menggilingTerbuat dari Kawat baja berkualitas tinggi
Daftar Harga metal cutting wheel Terbaru January 2026
| Union Cup Brushes (CAP) | Rp53.900 |
| KINIK Mata Gerinda Potong Ultra Thin | Rp7.900 |
| RYU Cup Brush | Rp30.900 |
| BOSCH Mata Gerinda Potong Standar Metal | Rp71.900 |
| Union Wire Cup Brushes (CC) | Rp34.900 |
| WD Mata Gerinda Potong Metal Seri T41 | Rp7.900 |
| Pennant Thermodynamic Steam PT11 | Rp1.399.900 |
| WD Mata Gerinda Potong untuk Stainless Steel | Rp4.900 |
| Nippon Resibon Cutting Wheel | Rp11.900 |
| KRISBOW Sikat Kawat Mangkok Crimped | Rp44.900 |
Data diperbarui pada 20/01/2026 (Harga belum termasuk PPN)



















































































































































/P101003458-1.jpg)



/P101003517-1.jpg)












/P101003636-1.jpg)
/P101003666-1.jpg)
