Beli drill chuck adaptor di monotaro.id
/NIKKEN%20Drill%20Chuck%20for%20Nc/hdP103607625-1.jpg)
/P101001142-1.jpg)
/7eP105813266-26.jpg)
Kami Menampilkan Rekomendasi Kami Untuk Anda! Anda Bisa Membelinya Kapan Saja di monotaro.id
- SAN OU Drill ChuckDeskripsi:Mesin bor duduk atau mesin bor tegak pada dasarnya merupakan mesin bor yang digunakan untuk membuat lubang persisi. Drill press ini menggunakan poros utama yang digerakan naik turun dan umumnya penggunaannya disesuaikan dengan kebutuhan. KEPALA BOR DUDUK adalah spare part untuk kegunaan mesin bubut sebagai mencekram mata bor nya.
- YUKIWA SEIKO Drill Chuckatribut:
- Accessories: Chuck handle
-
- Taiyo Seiki Iron Works Lightweight Shackle Screw typeatribut:
- Material: Special alloy steel
- YUKIWA SEIKO Drill ChuckDeskripsi:-High precision or more than JIS standard swinging accuracy is secured.-High precision and outstanding durability.-It is a tapered hole for grinding finish.-It is a powerful and stable grasping power.-For attaching drills etc.-Chuck Handle
- monotaro Drill Chuck (Chuck Bor)Deskripsi:It achieves high runout accuracy and strong and stable grasping power. To grasp the drill.atribut:
- Accessories: Chuck Handle 16mm
- Clutching Capability (mm): 1 - 13
- Dimension D1 (mm): 38
- Dimension D2 (mm): 53+-0.5
- Dimension L1 (mm): 89
- Dimension L2 (mm): 66+(-1)
- Jacobs Taper: JT6
- NORD-LOCK JAPAN Nord-Lock Washer (SC Hardened Material)Deskripsi:Two Nord-Lock washers are paired, and a wedge-shaped cam is applied to the mating surface.The wedge angle is set larger than the screw angle of the bolt, so not only does the bolt not loosen, but also due to the wedge effect Bolt tension increases. In addition, teeth are cut radially on both outer surfaces, and as the bolt is tightened, the teeth bite into the nut, the bolt surface seating surface and the tightened object, and are fixed. Reusable without being affected by temperature. Use with flat washers is prohibited 1 set of 2 sheetsatribut:
- Surface Hardness: HRA 75±4%(HRC48)
- Heat Resistance Temperature (°C): -20 to 300
- Thickness T (mm): 2.5
- Surface Treatment: Delta protection (chrome-free)
- Outer Diameter (mm): 13.5
- Nominal Dimensions of Screw: M8
- Material: Iron (SC hardened material)
- Nominal Size: M8
- Thickness (mm): 2.5
- Type: Nord lock washer
- BOSCH Kepala Boratribut:
- Replacement Key: D
- Bench-mounted Drill: +
- Impact-proof: +
- Illustration No.: 1
- Nord-lock WasherDeskripsi:Ring Dari Nord Lock ini memiliki ukuran M6atribut:
- Bolt Size: M6
- Dimension D (mm): 6.5
- Dimensions t (mm): 2.2
- Dimensions d (inch): 0.26
- Diameter: 15/64 inch
- Size: M6(15/64 inch)
- Dimension D (inch): 0.43
- Dimension T (inch): 0.09
- Dimensions d (mm): 10.8
- TRUSCO Wedge Lock WasherDeskripsi:- It is strong against all vibrations, it is a loose stopper which is not affected by lubricating oil and others.- Railway, shipbuilding, construction, automobiles and any industry that uses screwsatribut:
- Mass (g/pack): 7.0
- Nominal Diameter: NL5 (M5)
- TRUSCO Integrated Key-less Drill Chuckatribut:
- Accessories: Hook Spanner
- Clutching Capability (mm): 0.5 to 13
- Deflection Accuracty (mm): 5/100 or Less
- Outside Diameter (mm): 50.5
- Pricision (mm): 0.05
- Specifications: with Hook Spanner
-
- KRISBOW Adaptor Mata Bor SDS Plusatribut:
- Overall Length (mm): 60
- Diameter (mm): 10
- Thread: 20Unf
-
-
- SAN OU Keyless Drill Chuckatribut:
- Material: Steel
-
Daftar Harga drill chuck adaptor Terbaru January 2026
| Langsol Universal Adaptor for Drill Chuck | Rp239.900 |
| SAN OU Drill Chuck | Rp37.900 |
| YUKIWA SEIKO Drill Chuck | Rp759.900 |
| NIKKEN Drill Chuck for Nc | Rp4.299.900 |
| Taiyo Seiki Iron Works Lightweight Shackle Screw type | Rp269.900 |
| YUKIWA SEIKO Drill Chuck | Rp119.900 |
| monotaro Drill Chuck (Chuck Bor) | Rp219.900 |
| NORD-LOCK JAPAN Nord-Lock Washer (SC Hardened Material) | Rp129.900 |
| BOSCH Kepala Bor | Rp90.900 |
| Nord-lock Washer | Rp259.900 |
Data diperbarui pada 19/01/2026 (Harga belum termasuk PPN)
Buka WhatsApp