Beli dynabrade di monotaro.id

Non-vacuum random orbital sanders perform sanding at industrial and construction sites that have a separate dust mitigation or collection system or don't require removal of dust and swarf. They require clearing of dust from workpieces during sanding and from floors and equipment after sanding.

- Tool has 1/4inch-28 female thread. Comes mounted with 54021 Adapter for pads with 1/4inch-20 female thread.- Includes 50107 Pad (2inch diameter) for PSA (adhesive backed) abrasive discs.- Optional 54030 Rotary Sanding Head permits locking-type male thread pad to be mounted.- Optional 54585 Side Handle available.

Straight die grinders set their grinding head in line with the tool body and have a slim profile to reach through openings where an angled head may not fit. This alignment makes it easier to apply pressure to the grinding head for greater control with detailed work.

Contact arms fit specific belt sander brands and models to adapt them for a particular application.

These air tool replacement parts repair worn or damaged components in compatible pneumatic tools.

The pointed-tip sanding pad of detail sanders gets into tighter corners and contours than sheet sanders. Detail sanders move their pad in a tight orbital pattern to perform light material removal and fine finishing before coating. They sand less aggressively than rotary and random orbital sanders but may leave swirl marks or scratches, especially when sanding against the grain.

- Right Angle Mini-Dynorbital Random Orbital Sander- Built-in speed regulator, rear exhaust muffler, lever throttle. Heavy duty gear head. Includes sample 9-micron micro-finishing film discs. Optional 54585 Side Handle Assembly available.- Includes 54029 Sanding Head (accepts 3" and smaller dia. sanding pads with male locking-type threads).- Also Includes; 54031 soft density male locking-type pad, which accepts adhesive-backed micro-finishing film discs.

Threaded-shank sanding disc backing pads install on a compatible female-threaded spindle.

Universal interchange steel quick-connect air coupling plugs are the male end of coupling sets. Also called nipples, they're inserted into the coupling bodies (female ends) to connect tools to air, water, or fluid lines. Steel couplings are hard and resilient with more damage resistance than softer metals and a wide working temperature range.

- Grind, deburr, blend and polish, on metal, plastic, fiberglass, composites, rubber, glass and more. Grind from contact wheel or platen pad; finish and polish using slack of belt.- Tool includes 11206 Contact Arm for 3/4" wide x 18" long abrasive belts.- Lightweight, ergonomic 7 degree offset design. Grinding head pivots 360 degrees for securing in most efficient position.- Belt guard easily detaches for quick abrasive change; simple belt tracking adjustment knob.

These replacement parts fit specific models of Dynabrade air sanders and finishers.

Shop vacuum filters fit compatible shop vacuums to stop dust and allergens from recirculating during vacuuming. They filter fine particles from the vacuumed air as it exits the vacuum's exhaust port.

Polishers and buffers rotate polishing bonnets, woven pads, and other abrasives to refine surfaces and add luster. Also known as angle polishers, they remove light scratches, blend spot repairs back into the finish, and apply rubbing compounds and waxes for a shiny finish. They are commonly used for automotive detailing and metal finishing.

Double-pivot swivel fittings have two pivot points that rotate 360° to reduce twisting. These threaded fittings allow the air line hose to drop directly to the floor and out of the way when connected to an air tool.

The collet of these pencil grinders accepts burs and mounted points with a 1/8" shank diameter. A 1/8" collet is the standard size for pencil grinders. Attachments with a 1/8" shank are typically used for lighter-duty work than those with a thicker shank, and for heavier-duty work than those with a thinner shank.

Inline-mount finishing tools extend their spindle straight out from the tool body so that the operator moves the tool from side to side to roll the abrasive drum or wheel along a surface. They are typically used to clean, sand, and add grain to surfaces.

- Includes 1/4inch drill chuck and key.- Front exhaust to keep operator's workpiece clean.- Thermal-insulated handle reduces cold air transmission to operator- Made In The USA; Ideal for use in metal working, woodworking, marine and aerospace industries

The black-and-gold finish on these drill bits lubricates the bits and provides some resistance to wear and rust. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece. They also have flats on their shank that help prevent the bits from slipping in a drill chuck when drilling at high speeds or under heavy loads.

Threaded-shank sanding disc backing pads install on a compatible female-threaded spindle on an orbital sander or rotary tool.

- Accepts 1/4inch dia. or 1/8inch diameter shanked files. Files sold separately.- Replaces tedious hand filing. Easily enters narrow slots. Use on metal, wood, plastic, fiberglass, etc.- Variable-length stroke from 0 -1/4inch. Tool runs at 5,000 strokes per minute.- Barrel indexes 360 degrees for ideal comfort.- Tool includes 94407 Flow-Control Dynaswivel..