Beli ebara di monotaro.id

Pompa ini juga dapat disebut pompa lumpur, pompa banjir

Ebara memiliki range produk Submersible Pump DL yang lengkap dengan daya 0.75 -22 kW sangat cocok digunakan pada rumahan, gedung, konstruksi dan industri

Pompa belum termasuk motor

Pompa ini juga dapat disebut pompa lumpur, pompa banjir

The liquid-contacting parts are made of stainless steel and are compliant with leaching performance standards.The main pump parts are made of pressed stainless steel, making it small and lightweight.The motor is directly driven, so there is no vibration or noise caused by poor direct connection.A mechanical seal is used for the shaft seal, making maintenance easy.accessories :Motor cover x 1,Single base x 1,Companion flange x 1 setLocation : Indoors/Outdoors: Ambient temperature 0℃ to 40℃, relative humidity 85% or less (no condensation), altitude 1000mm or less, no corrosive or explosive gases or steam. Even if the motor cover is attached, it cannot be used in the following locations: Near steam outlets, in locations exposed to cross-flowing rainwater due to typhoons or strong winds, and in locations strongly affected by sea breezes.attributionRelative Humidity : 85% or less (no condensation) Ambient temperature (℃) : 0-40Standard allowable compression pressure (MPa [kgf/cm 2 ]) : 0.2(2)Fluid Handled : ShimizuLiquid Temperature Range (℃) : 0-60Dimensions MW(mm) : 160Dimensions BM(mm) : 140Dimension BY1(mm) : 250Dimensions BD(mm) : 12Dimensions SG(mm) : 16Dimensions DG(mm) : 16Structure (impeller) : ClosedStructure (shaft seal) : Mechanical sealMaterial (casing) : SUS304Material (impeller) : SUS304 Material (main shaft) : SUS304Structure (bearings) : Sealed ball bearings (inside electric motors) Dimensions BL(mm) : 170

Pompa ini juga dapat disebut pompa lumpur, pompa banjir- Produk adalah aksesoris pompa- Produk tidak termasuk pompa

The tricolloid pump is an inscribed gear type pump in which an external gear (outer rotor) and an internal gear (inner rotor) that fits inside it mesh with each other to rotate, and thetooth profile is formed by a trochoid curve.The trochoid pump has a circular case and an outer disk shape with teeth protruding inward, and the hollow part consists of a pentagonal outer rotor and a thread-wound inner rotor with four teeth that mesh with it. Thedrive shaft is the center of the inner rotor. The center of the inner rotor and the center of the outer rotor are eccentric.Normally, when the inner rotor rotates, the outer rotor is driven in the same direction.Rotation When the distance between the two is short, the inner peak and the outer valley mesh with each other, but when the distance is long, there is one less inner tooth, sothe three spaces formed between the inner and the outer expand or contract. It acts as a pump and forcibly sucks in and discharges the liquid.Mass (kg)

- Specification: Indoor use. - Operating Environment: At the point where the dust is many and seeing from the use outside the ambient temperature range, and horizontal position, the pump, cannot do the kind of installation which is after from the motor.