Beli kinki di monotaro.id
/4vP103683175-2.jpg)
Kami Menampilkan Rekomendasi Kami Untuk Anda! Anda Bisa Membelinya Kapan Saja di monotaro.id
KINKI Beta Nozzleatribut:- Nozzle Length (mm): 52
- Nozzle Opening Diameter (mm): 1 ( x 16 pieces)
- Nozzle Attachment Port: G1/8
- Material: ABS, brass
- Specification: Swivel plug
- Maximum usage pressure: 1MPa
- KINKI Air Duster GunDeskripsi:-Can suction and blow off with one lever operation.-Possible to increase or decrease the flow rate by lever operation.-Air hose connection nipple is a 2-way type that can be used for both up and down. -Suction of fine dust.-Can absorb oil when bag is removed.-For various industries such as textiles industry etc.
- KINKI Light-Weight Air RegulatorDeskripsi:-It is a lightweight pressure reducing valve that supplies stable pressure on hand.atribut:
- Maximum Working Pressure: 1MPa
- Working Temperature Range: -10 to 60°C
- Air Input Port: G1/4
- Air Outlet: G1/4 Female Butterfly Wing Nut
- Material: Aluminium, brass, iron etc.
-
- TRUSCO Air Flow RegulatorDeskripsi:The strength of the air can be done smoothly by dialing operation. Connect to air duster, air thunder, air spray gun, and smoothly perform the strength of air by dial operation.atribut:
- Purpose of Use: Connect to air duster, air sander and air spray gun, etc., and smoothly adjust the strength of air by dial operation.
- KINKI Rubber nozzleDeskripsi:The rubber at the tip of the nozzle reduces scratches on the work piece, allowing blow operation by pressing. Does not hurt the work area.atribut:
- Total Length (mm): 30.0
- Caliber (Ø mm): 2.5
- Use: Air blow on painted surfaces, glass surfaces and inside pipes, water and oil removal, dust blowing
- Specification: With Screw Connection O-ring
- Material: Brass, rubber (nozzle only)
- Thread Length (mm): 8
- Operating Temperature (°C): -10 to 80
- Width Across Flats (mm): 14.0
- Compatible Fluid: Air
- Working Air Pressure Range (MPa): 0 to 1
- KINKI High Power Air Duster Gun type 601AXE-BETASatribut:
- Nozzle Length (mm): 51
- Nozzle Opening Diameter (mm): 1 ( x 16 pieces)
- Nozzle Attachment Port: G1/8
- Compressed Air Attachment: 1/4 plug
- Specification: Swivel plug
- Total Length (mm): 139
- Maximum usage pressure: 1MPa
- Purpose of Use: Air blowing, drying, air cooling, blowing off garbage, cleaning, dewatering drying and air curtain etc.
-
- Ultra Alfatek Fitting Hydraulic Hose Male JIC x NPT Female Typeatribut:
- Size (inch): 1/4-1/8
- AIR MASTER Wide Nozzle Made of Resin with PlugDeskripsi:Nozzle compatible with coupling type air duster. This nozzle is ideal for drying work because it blows air in a strip shape.atribut:
- Material: (Nozzle body) Resin/Brass
- Maximum Operating Pressure (MPa): 0.7
- Connection: 20-inch plug
- Nozzle Length (mm): About 60
- Nozzle Diameter (Φmm): About 1 x 28
- SAGOLA Automatic Spray Gun 4041 Mixatribut:
- Product Inlet (inch): BSP 3/8
- Max. Air Inlet Pressure (bar): 2
- Air Consumption (L/minute): 150
-
- TRUSCO Air DustersDeskripsi:-With a plug which can attach air hose with one touch. -Blowing of cutting chips etc. that is generated during machine processing.atribut:
- Nozzle Mounting Port: G1/8
- Maximum Working Pressure: 1MPa
- TRUSCO Special Nozzle for Air Dusteratribut:
- Finishing Material: Brass / Chrome Plated
- Nozzle Connector Diameter: G1/8
- Nozzle Length (mm): 30
- Nozzle diameter (mm): 2
- Weight (g): 10
- TEKIRO Air Duster (Semprotan Angin)Deskripsi:TEKIRO DG1-3 Air Duster adalah air duster yang digunakan untuk membersihkan debu dengan tenaga angin kompresor, dilengkapi dengan quick coupler plug ukuran 20 PM. Air duster ini terbuat dari bahan berkualitas tinggi.Fungsi : untuk mengisi / mengalirkan udara di kompressor Material : Aluminiumatribut:
- Size: DG1-3
- Material: Aluminium
- Dimension 2 (mm): 5
- Dimension 1 (mm): 120
- Dimension 4 (mm): 123
- Dimension 5 (mm): 8
- Dimension 3 (mm): 26
- Sellery Hose NozzleDeskripsi:> Spray pattern can be adjusted (60-270/271/272/273/336)> Lock clip for continuous spray (60-270/271/272/273/336)> 3 spray pattern (60-274)> 8 pattern spray head: FLAT, SHOWER, MIST, CONE, VERTICAL, JET, RINSE, CENTER (60-275/276)> High pressure max 100 psi (60-277)atribut:
- Outside Diameter (inch): 3/4
- Ikeuchi Flat Type Air Nozzleatribut:
- Total Length x W (mm): 90 x 42
- Nozzle Mounting Port: R1/4
- PCL Extension NozzleDeskripsi:Suitable for use with both standard and plastic blow guns. Allows a greater distance from a workpiece.atribut:
- Material: Stainless Steel
- For use with: Plastic Blow Guns Standard Blow Guns
- Nozzle Size: 3.0mm
- Type: Nozzle
- Thread Size: R 1/4 Inch
- Number of Pieces: 1
- Overall Length: 230mm
- Suitable for use with: Air/Water
- Product Number: BGN466
- Part Number: PCL2592466K
-
- Ikeuchi Straight Nozzle CCP-A SeriesDeskripsi:Since it injects straight air from a single hole, it has high straightness and a high air blow effect.atribut:
- Material: S303
- Screw Size: R1/8
Daftar Harga kinki Terbaru February 2026
| KINKI Beta Nozzle | Rp549.900 |
| KINKI Air Duster Gun | Rp789.900 |
| KINKI Light-Weight Air Regulator | Rp1.799.900 |
| KINKI Air Duster Guns | Rp319.900 |
| TRUSCO Air Flow Regulator | Rp219.900 |
| KINKI Rubber nozzle | Rp249.900 |
| KINKI High Power Air Duster Gun type 601AXE-BETAS | Rp1.999.900 |
| KINKI Chassis Suction Type Spray Gun Gun Kit With Option | Rp8.599.900 |
| Ultra Alfatek Fitting Hydraulic Hose Male JIC x NPT Female Type | Rp11.900 |
| AIR MASTER Wide Nozzle Made of Resin with Plug | Rp99.900 |
Data diperbarui pada 17/02/2026 (Harga belum termasuk PPN)
Buka WhatsApp