Beli enka di monotaro.id

NK-7018 is an iron powder low hydrogen type electrode, which has been designed for the use on heavy-duty structures in all positions. Its hydrogen content of weld metal is very low and it has excellent toughness and crack resistibility. It has applied of low carbon steel with high efficiency. high. APPLICATIONS Heavy-duty structures, shipbuilding, boilers, storage tanks, pressure vessels and thick plate structures using 50 kgf/mm2 class high tensile steel. INSTRUCTIONS FOR WELDING 1. Dry the electrodes at 350 - 400ºC for 30-60 minutes before use. 2. Choose the welding current within the suitable welding current range. 3. Adopt back step method or strike the arc on a start tab to prevent blowholes at the arc starting. 4. Keep the arc length as short as possible.

For metal and stainless steel.

Untuk Mild Steel, High Tensile Steel, & Pipie Line Welding.

For general steel materials.

Multi-Function Indication Monitor for Production Site Visualization (Models with indication monitor)

NK-88 is a high titania type covered electrode which designed with high workability, slag removal, and easy for tack weld. APPLICATIONS General-purpose fabrication and structures of steel sheets, vehicles, buildings, vessels, machinery-manufacture and various structures of mild steel. INSTRUCTIONS FOR WELDING 1. Dry the electrodes at 80 - 100°C for 30-60 minutes before use. 2. Choose the welding current within the suitable welding current range.

Untuk Mild Steel, High Tensile Steel, & Pipie Line Welding.

Application : - Welding of vehicles, machines and light structural steels. Surface dressing of heavy steel structure.Characteristics : - CR-13 is a high titania type electrode, whose usability is excellent in all position welding. - CR-13 is especially suitable for welding of light structural steels because arc stability, - Slag removal and bead appearance are good and its penetration is shallow. Notes on usage : - Pay attention not to exceed the range of proper currents. Welding with excessive current not only lowers X-ray soundness, but also causes increase of spatter, undercut and insufficient slag covering. - Dry the electrodes at 70-100°C for 30-60 minutes before use. Excessive moisture absorption lowers usability and may result in some porosities.

OK 48.04 is an AC/DC, general purpose, LMA electrode for welding mild and low-alloy steels. It has very good welding properties and deposits a high quality weld metal with very good mechanical properties. The electrode can be used for welding restrained structures where high welding stresses cannot be avoided.

Most common nonas yarn braid of square cross section impregnate with lubricant and graphite

Flax yarn impregnate with PTFE dispersion and lubricant

NK-7016 is a low hydrogen type electrode used for welding of 50 kgf/mm2 high tensile steel. It has excellent usability in all position welding and excellent workability such as good arc stability, smooth beads appearance and excellent slag removal. Its mechanical properties, X-ray qualities and notch toughness are very good and it shows excellent properties in all positions. APPLICATIONS General steel structures, structure of vehicles, storage tanks, boilers, shipbuilding and high-pressure vessels using 50 kgf/mm2 class high tensile steel. INSTRUCTIONS FOR WELDING 1. Dry the electrodes at 350 - 400°C for 30-60 minutes before use. 2. Choose the welding current within the suitable welding current range. 3. Adopt back step method or strike the arc on a start tab to prevent blowholes at the arc starting. 4. Keep the arc length as short as possible.

Kawat las khusus bermutu tinggi dengan kawat inti Ferronickel Alloys (45% Fe-55% Ni). Digunakan untuk pengelasan segala macam besi cor terutama besi cor penahan beban (besi cor Nodular) yang retak atau patah, seperti roda gigi, tromol, pump housing, coupling, pulley, machine bases, dll. Gunakan metodelas simetri atau langkah loncat. TS: 50.5kgf/mm². €: 12%. Arus: AC, DC+, DC-.