Beli socomec di monotaro.id

SIRCO is manually or remotely operated multipolar load break switches. They make and break under load conditions and provide safe isolation. SIRCO are designed for 415 VAC and DC low voltage electrical circuits. SIRCO AC are designed for heavy duty applications up to 690 VAC - AC 23.The Solution for :- Main switchboard- Distribution panel- Emergency breaking- Network coupling- Local safety breaking

Motorised Changeover Switches.ATyS r are 3 or 4 Pole remotely operated motorised transfer switches with positive break indication.They enable the on-load transfer of two three-phase power supplies via remote volt-free contacts, from either an external automatic controller, using pulse logic, or a switch.They are intended for use in low voltage power system where interruption of the load supply is acceptable during transfer.The ATyS r are compatible with our ATyS C30 external controllers (for mains/ mains and mains/ genset application) and ATyS C40 Controllers (for genset/genset applications).

Digital panel meter.Three phases - via CT up to 6000 A dimensions 96 x 96 m.The MULTIS L50 is a panel mounted digital meter displayingmulti-measurement and energy values directly on its large backlitLCD display. It is designed for utilisation on three-phase orsingle-phase networks with connection via CT and is suitable forapplications of up to 6000 A. The product can be configured by theuser via the keypad and the display.

ATyS s family of “remotely operated transfer switching equipment” (RTSE) are designed for use in power systems for the safe transfer of a load supply between a normal and an alternate source. The changeover is done in open transition and with minimum supply interruption during transfer ensuring full compliance with IEC 60947-6-1, GB 14048-11 and other international TSE standards as listed.

- Dirancang untuk dapat melakukan peralihan secara manual atau motorized (optional) antara sumber tegangan utama dan sumber tegangan alternative/genset- 3 pole + netral- Ukuran kecil sehingga menghemat ruangan pada panel- System switching netral advanced switch neutral pole, menjamin keamanan antara fasa dan netral- Pada saat ON : kutub netral akan terhubung duluan diikuti dengan kutub fasa- Pada saat OFF : kutub netral terbuka belakangan setelah kutub fasa.- COS 3P + N

Analog Panel Meter.

Multifunction power monitoring device - PMD.The DIRIS A-30 and DIRIS A-41 are power monitoring devices that provide the user with all of the measurements needed to complete energy efficiency projects and to assure the monitoring of electrical distribution.All the information can be used and analysed remotely using energy efficiency software packages.Basic Device Aux Power Supply Us110...400 VAC/120...350 VDC

ATyS r and ATyS d are 3 or 4 pole remotely operated motorised transfer switches with positive break indication. They enable the on-load transfer of two three-phase power supplies via remote volt-free contacts, from either an external automatic controller, using pulse logic, or a switch. They are intended for use in low voltage power systems where interruption of the load supply is acceptable during transfer.

Measurement and monitoring system for electrical installations.The DIRIS Digiware system is a hub of technological innovations that revolutionises the world of measurements, bringing a high degree of flexibility to installations and making connection and configuration easy.These innovations, together with unrivaled performance in terms of accuracy and functionality, make DIRIS Digiware the most effective solution for metering consumption, measuring and monitoring the quality of electrical energy in industrial and commercial applications.Management and optimisation of the power installed: DIRIS Digiware allows you to identify most demanding loads and monitor abnormal electrical values, providing you with perfectly-manage electrical network.Simplified network maintenance: the electrical energy quality monitoring functions offered by DIRIS Digiware make it easier to anticipate electrical malfunctions.

Remotely operated Transfer Switching Equipment.ATyS d M are single-phase or three-phase transfer switches that are remotely controlled using volt-free contacts from an external controller. They are modular products with positive break indication.They are intended for use in low voltage power supply systems where a brief interruption of the load supply is acceptable during transfer.

ATyS, ATyS d, ATyS t, ATyS g, ATyS p

RS485 Modbus - 3 inputs/ 2 inputsMultifunction power monitoring device - PMD.DIRIS A-40 is a panel-mounted power monitoring device (PMD). It is designed for measuring, monitoring and reporting electrical energy.The DIRIS A-40 offers a range of functions for measuring voltage, current, power, energy and quality. It allows the analysis of single-phase or three-phase load.

Remotely operated Transfer Switching Equipment.FunctionThe ATyS d H is a three-phase transfer switch, 3 and 4 poles, designed for low voltage highpower applications that require high-performance and fast reliable switching. The open transitiontransfer is performed on-load in line with IEC 60947-6-1 and GB 14048-11 standards(Class PC) with minimal power supply interruption to the load during transfer.The ATyS d H is remote transfer switching equipment (RTSE) with an integrated dual powersupply (DPS) the accepts remote orders through volt-free contacts.AdvantagesReady for installation in the enclosure of your choicerThe ATyS d H has been designed to facilitateinstallation as it is available as a fixed orcompletely with drawable type of transferswitch. It is composed of two switchesthat are mounted one above the other witheasily accessible power connections locatedat the rear. Furthermore the ATyS d H doesnot need any external bridging bars as theload side is connected within the product.This enables to save time during installation.High-performance switchingThe ATyS d H offers high withstand shortcircuit current ratings of 143 kA I cw (making)and 65 kA for 0.1sec (withstand).Further to its high short circuit withstand, the ATyS d H performance in terms of loadswitching capacity is AC-33iB (6 x cos Ø 0.5) without derating.Safe on-load transfer: I-0-IIThe ATyS d H includes two mechanicallyinterlocked switches to ensure fast switchingwhilst providing a neutral (Off - 0) position.This ensures that the main and alternativepower supplies do not overlap.

SIRCO VM1 is 4 pole modular manual transfer switches with visible breaking. They provide on-load transfer between two sources for any low voltage power circuit, as well as safety isolation. Other applications include source inversion (e.g. to change the direction of a motor) or grounding/earthing.The Solution for : - Energy production- Critical buildings

SIRCO M IS manually operated modulable and modular multipolar load break switches. They make and break under load conditions and provide safety isolation for any low voltage circuit, particularly for machine control circuits.The Solution for :- Main incoming load break- Distribution load break- Machine control- Local safety load break