Beli sanplatec di monotaro.id

-The handle is easy to use and its shape fits in the hand.-This is suitable for stirring using a magnetic stirrer.-For scale of each size, there is a line for the full scale part. It is easy to see and check from any positions. .-With handle

Polyethylene containers are EOG sterilized and packed. Please use as sample bottles for water sampling, cosmetics, chemicals, etc. for water quality inspection.

Metal-free high-quality fluororesin bottle. Metal-free high-quality fluororesin PFA bottle. The main body, cap, and inner plug are all made of fluororesin PFA, so there are few eluted ions and the purity is excellent. It is highly resistant to organic solvents as well as acids and alkalis. Heat resistant temperature is 200 °C. It also has excellent non-adhesiveness. We carry out a decompression leak test for each lot, and we are confident in the sealing performance. Ideal for sample containers in analytical institutions and storage containers for high-purity reagents.

Gas sterilized sample container. A sterilized pack of Polypropylene containers. Use as a sample bottle for water sampling, food, cosmetics, chemicals, etc. The lid is packed in a half cap state. * All products are individually packaged. * The 100mL type has “sterilized” printed on the filter. There is no printing on other containers. * The lid is packed with a half cap.

The bottle is made from a sugarcane-derived biomass plastic blended with regular polyethylene, which reduces carbon dioxide emissions by 70%. It is blended not only in the main body, but also in the inner stopper and cap. Performance is no different from conventional petroleum-derived polyethylene. Since CO2 is absorbed during the growing stage of sugarcane, even if it is incinerated as waste, it can be considered as zero CO2 emissions (carbon neutral), contributing to the prevention of global warming. It is an environmentally friendly product that is effective from the perspective of corporate social responsibility. Comes with an inner stopper. Unlike biodegradable plastics, it does not decompose naturally.

-Volatile chemicals such as ethanol and acetone will raise the internal pressure of the container during storage and the chemical will drip, but by relieving the stopper attached to the cleaning bottle cap, pressure can be relieved and liquid dripping at the time of storage can be prevented.-By removing the tip nozzle, the amount of chemicals injection volume can be increased.

A large bat made of impact-resistant Polystyrene. The bottom is not flat but uneven. * The bottom is not flat but uneven

The definitive version of the plastic bottle. Standard for plastic bottles. The body and cap are made of Polyethylene. Widely used from laboratories to chemical factory production lines.

Low cost one-touch bottle with excellent workability. Polypropylene bottle with excellent heat resistance, chemical resistance and transparency. No need for packing, no plugs, and workability has been improved. Very good test results for acid and alkali resistance and some solvents. A one-touch bottle with excellent workability.

-It is a resin made measuring cylinder which realized transparency equivalent to glass.

The body and lid are both transparent. You can immediately see the status of stored items and when changing silica gel. Dry seal method with O-ring. Eliminates the hassle of applying grease. It is the best in strength among transparent resins. Even if dropped, it is hard to break and can be used with confidence. The magnetic plate is heat-resistant, corrosion-resistant, non-adhesive and does not scratch. The properties of polycarbonate (PC) are excellent in tensile strength and impact strength, and excellent in heat resistance. The nozzle diameter of the cock with a cock is 9Φmm. The vacuum gauge of PC-210KG / PC-250KG is 0 to -0.1MPa (minimum scale unit is 0.002MPa).

Made of Polypropylene, it has excellent chemical resistance, heat resistance and transparency. Workability is improved with no internal plug.

-By turning the adjustment screw with indicator, it is possible to easily peel strip suitable for the size of vinyl wire.-With a sharp cutter.

Clear bottles do not leak even without a stopper. The laborious work of removing the internal plug has been eliminated, saving time. In accordance with FDA standards 117/1640, USP CLASS IV, Ministry of Health and Welfare Notification No. 98 and Ministry of Health and Welfare Ordinance No. 17, it is registered in the voluntary regulations of the Sanitation Council for Polyolefins. Plastic plasticizers (DOA / DOP) and antioxidants (BHT / BHA) are not used, so they can be used for food containers and medical purposes. * K-RESIN is softened or dissolved by alcohol, ketone, ester, ether and aromatic organic solvents. * Many oil products also affect K-RESIN, but the extent depends on the usage conditions of the molded product. It is recommended to test and confirm in advance under actual usage conditions, including these chemicals.