Beli airtac di monotaro.id
/ksP105382748-2.jpg)
%20Lurus/Airtac%20Straight%20Fitting%20Pneumatic%20PC%20Series/ibP105734659-2.jpg)
/o9P105732873-1.jpg)
/p7P105732907-1.jpg)
%20Lurus/Airtac%20Fitting%20Pneumatic%20PU%20Series%20Straight/m0P105734792-1.jpg)
Kami Menampilkan Rekomendasi Kami Untuk Anda! Anda Bisa Membelinya Kapan Saja di monotaro.id
EMC AEFC Series FRL Filter (FIlter Regulator)atribut:- Series No.: AE: Small Body Size without bowl guard
- Poer Size (inch): 1/4
- Type Code: FC: Filter & Regulator +lubricator
- Body Size: 2000 Body
- Working Medium: Air
- Filter Precision (µm): 25 (5.40µm is optional)
- Adjust Pressure Range (MPa): 0.05-0.85
- Filter Bowl Capacity (cc): 15
- Guaranteed Pressure (MPa): 1.5
- Maximum Adjusting Pressure (MPa): 1
- Weight (g): 500
- Working Temperature (°C): 5~6
-
- Airtac Straight Fitting Pneumatic PC Seriesatribut:
- Standard Color: Black
- Proof Pressure (MPa): 1.5
- Negative Pressure: -750mmHg(10Torr)
- Ambient and Fluid Temperature (°C): -20-70
- Applicable Tubing: Soft Nylon or Polyurethane
-
- Airtac Standard CylinderDeskripsi:Installation and application1. When load changes in the work, the cylinder with abundant output capacity shall be selected .2. Relative cylinder with high temperature resistance or corrosion resistance shall be chosen underthe condition of high temperature or corrosion .3 . Necessary protection measure shall be taken in the environment with higher humidity, much dust or water drops, oil dust and welding dregs .4 . Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.5. The medium used by cylinder shall be filtered to 40pm or below.6 . Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing .7 . The cylinder shall be carried out test run without load before application . Prior to run, buffer shall be turned to the minimum and gradually released to avoid the damage on cylinder caused by excessive impact.8 . The cylinder shall avoid the influence of side load in operation to maintain the normal work of cylinder and extend the service life.9 . If the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment to the surface. Anti-dust caps shall be added in air inlet and outlet portsatribut:
- Acting Type: Double acting
- Fluid: Air (to be filtered by 40μm filter element)
- Proof Pressure (MPa): 1.5 (215psi) (15bar)
- Temperature (°C): -20 to 70
- Speed Range (mm/s): 30 to 500
- Stroke Tolerance: 0-250 +1, 251-1000 +1.50, 1001-1500 +2
- Cushion Type: Variable Cushion
- Operating Pressure (MPa) : 0.15 to 1.0 (22-145psi) (1.5-10.0Bar)
- Airtac lubricator bl seriesatribut:
- Port Size: 1/4
- Pressure Range: 05-1MPa(7-145Psi)
- Proof Pressure: 1.5
- Capacity of Drain Bowl (cc): 90
- Temperature Range: -5-70°C (unfreeze)
- Thread Type: PT
- Airtac Standard Cylinder Bore 40mm (Tir-Rod)Deskripsi:Tie-rod cylinderThe cylinder barrel and front/rear cap is jointed by tie rods with high reliability.Convenient and fast fix sensor switchSensor switch can be directly fixed on the cylinder, which is convenient and fast. the counterpart sensor switch type is: CMSG, DMSG(S)Adjustable air bufferWith adjustable air buffer on the front and back coverInstallation and application1. When load changes in the work, the cylinder with abundant output capacity shall be selected.2. Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion.3. Necessary protection measure shall be taken in the environment with higher humidity, much dust or water drops, oil dust and welding dregs.4. Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.5. The medium used by cylinder shall be filtered to 40 p m or below.6. Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.7. The cylinder shall be carried out test run without load before application. Prior to run, buffer shall be turned to the minimum and gradually released to avoid the damage on cylinder caused by excessive impact.8. The cylinder shall avoid the influence of side load in operation to maintain the normal work of cylinder and extend the service life.9. If the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment to the surface. Anti-dust caps shall be added in air inlet and outlet ports.atribut:
- Bore Size (mm): 40
- Acting Type: Double acting
- Fluid: Air (to be filtered by 40μm filter element)
- Proof Pressure (MPa): 1.5 (215psi) (15bar)
- Temperature (°C): - 20 to 70
- Speed Range (mm/s): 30-800
- Stroke Tolerance: 0-250+1.00 , 251-1000+1.5 , 1001-1500+2.0
- Cushion Type: Variable Cushion
- Port Size (inch): 1/4
- Operating Pressure (MPa) : 0.15-1.0 (22-145Psi) (1.5-10.0Bar)
- Airtac Fitting Pneumatic PL Series Male Elbowatribut:
- Standard Color: Black
- Proof Pressure (MPa): 1.5
- Negative Pressure: -750mmHg(10Torr)
- Ambient and Fluid Temperature (°C): -20-70
- Applicable Tubing: Soft Nylon or Polyurethane
- Airtac Mini Cylinder MA Seriesatribut:
- Material: Stainless Steel
-
- Airtac Polyrethane Tube/ Selang PUatribut:
- Package Length(m): 100
- Burst Pressure (MPa): 3 (at 23°C)
- Color: Random Color
- Temperature (°C): -20-70
- Working Pressure (MPa): 1 (at 23°C)
- Airtac Control Valve 5/2 Wayatribut:
- Fluid: Air (to be filtered by 40 µm filter element)
- Operating: External Control Direct Acting Type
- Valve Type: 5/2 Way
- Lubrication: Not required
- Body Material: Aluminium Alloy
- Pressure Range (MPa): 0-1.0 (0-145psi)
- Proof Pressure (MPa): 1.5 (215psi)
- Temperature (°C): -20 to 70
- Airtac Standard Cylinder Bore 80mm (Tir-Rod)Deskripsi:Tie-rod cylinderThe cylinder barrel and front/rear cap is jointed by tie rods with high reliability.Convenient and fast fix sensor switchSensor switch can be directly fixed on the cylinder, which is convenient and fast. the counterpart sensor switch type is: CMSG, DMSG(S)Adjustable air bufferWith adjustable air buffer on the front and back coverInstallation and application1. When load changes in the work, the cylinder with abundant output capacity shall be selected.2. Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion.3. Necessary protection measure shall be taken in the environment with higher humidity, much dust or water drops, oil dust and welding dregs.4. Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.5. The medium used by cylinder shall be filtered to 40 p m or below.6. Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.7. The cylinder shall be carried out test run without load before application. Prior to run, buffer shall be turned to the minimum and gradually released to avoid the damage on cylinder caused by excessive impact.8. The cylinder shall avoid the influence of side load in operation to maintain the normal work of cylinder and extend the service life.9. If the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment to the surface. Anti-dust caps shall be added in air inlet and outlet ports.atribut:
- Bore Size (mm): 80
- Acting Type: Double acting
- Fluid: Air (to be filtered by 40μm filter element)
- Proof Pressure (MPa): 1.5 (215psi) (15bar)
- Temperature (°C): - 20 to 70
- Speed Range (mm/s): 30-800
- Stroke Tolerance: 0-250+1.00 , 251-1000+1.5 , 1001-1500+2.0
- Cushion Type: Variable Cushion
- Port Size (inch): 3/8
- Operating Pressure (MPa) : 0.15-1.0 (22-145Psi) (1.5-10.0Bar)
- Airtac Foot Pedal Valveatribut:
- Fluid: Air (to be filtered by 40μm filter element)
- Pressure Range (MPa): 0 to 1.0 (0-145Psi)
- Lubrication: Not Required
- Operating: Acting type controlled by foot normally closed
- Proof Pressure (MPa): 1.5 (215Psi)
- Temperature (°C): - 20 to 70
-
- Airtac Fitting Pneumatic PHW Series Double Universal Female Elbowatribut:
- Standard Color: Black
- Proof Pressure (MPa): 1.5
- Negative Pressure: -750mmHg(10Torr)
- Ambient and Fluid Temperature (°C): -20-70
- Applicable Tubing: Soft Nylon or Polyurethane
- Airtac Twin Rod Cylinderatribut:
- Acting Type: Double acting
- Fluid: Air (to be filtered by 40μm filter element)
- Proof Pressure (MPa): 1.5 (215psi)
- Temperature (°C): - 20 to 70
- Speed Range (mm/s): 30 to 500
- Stroke Tolerance: ≤ 100 +1.00, > 100 +1.50
- Cushion Type: Bumper
- Port Size: M5x0.8
- Operating Pressure (MPa) : 0.15 to 1.0 (22-145Psi)
- Airtac Fitting Pneumatic PU Series Straightatribut:
- Standard Color: Black
- Proof Pressure (MPa): 1.5
- Negative Pressure: -750mmHg(10Torr)
- Ambient and Fluid Temperature (°C): -20-70
- Applicable Tubing: Soft Nylon or Polyurethane
- Airtac Fitting Pneumatic PEB Series Male Branch Teeatribut:
- Standard Color: Black
- Proof Pressure (MPa): 1.5
- Negative Pressure: -750mmHg(10Torr)
- Ambient and Fluid Temperature (°C): -20-70
- Applicable Tubing: Soft Nylon or Polyurethane
- Airtac Solenoid Valve 7V Seriesatribut:
- Line Length (m): 0.5
Daftar Harga airtac Terbaru October 2025
| EMC AEFC Series FRL Filter (FIlter Regulator) | Rp229.900 |
| Airtac Solenoid Valve | Rp119.900 |
| Airtac Straight Fitting Pneumatic PC Series | Rp18.000 |
| Airtac Solenoid Valve 4A Series | Rp409.900 |
| Airtac Standard Cylinder | Rp1.799.900 |
| Airtac lubricator bl series | Rp409.900 |
| Airtac Standard Cylinder Bore 40mm (Tir-Rod) | Rp759.900 |
| Airtac Fitting Pneumatic PL Series Male Elbow | Rp6.000 |
| Airtac Mini Cylinder MA Series | Rp439.900 |
| Airtac Solenoid Valve 2W Series | Rp659.900 |
Data diperbarui pada 11/10/2025 (Harga belum termasuk PPN)
Buka WhatsApp