Beli refco di monotaro.id
/19P102248045-5.jpg)
/o4P110954868-1.jpg)
/P103069287-1.jpg)
Kami Menampilkan Rekomendasi Kami Untuk Anda! Anda Bisa Membelinya Kapan Saja di monotaro.id
Refco Digital Vacuum Presure Gaugeatribut:- Range: 0 to 18000 Microns
- Resolution: 0-20: 0.2 micron;21-200: 1 micron;201-500: 5 microns
- Sensor Type: Thermistor
- Connector: Standard Male 1/4 inch SAE
- Operating Temperature Range (°F): +32 to 104
- Storage Temperature Range (°F): -4 to 140
- Max. Over Pressure (psi): 500
- Accuracy: +/- 10% 0-100 micron; +/- 6% 101-750 microns; 101 – 750 Microns +/- 45 Microns
- Power Supply: 3 x 1.5 V AAA / LR03 batteries
- Unit: Pascal, Microns, mbar, Torr, mTorr, psi, inHg
- Refco Bourdon Type Gaugeatribut:
- Type: Bourdon-type
- Accuracy class: 1.6
- Nominal Size: 63
- Diameter (mm): 68
- Oil-filled: Yes
- Color: Grey
- Connection Point: Bottom
- Gas Connection: 1/4\" SAE
- Material: Stainless steel
- Mounting Ring: For Back Mounting
- Packaging: Blister
- Pressure Scale: bar | psi
- Refrigerant: R22 | R134a | R404A | R407C
- Zero Point Adjustment: No
- monotaro Manifold Kit For R410A (With Hose)Deskripsi:Easy to use ball valve type. With sight glasses for convenient fluid confirmation. For R410a refrigerantatribut:
- Compound Gauge (MPa): -1 to 3.8 (low pressure side)
- Pressure (MPa): -1 to 5.3 (high pressure side)
- External Dimensions (mm): 120×230
- Accessories: Charge hose (red, blue, yellow x 1 each), storage case
- Hose Length (mm): Approximately 920
- Body Material: (Manifold) Aluminium, (Fitting) Brass
- Connection Diameter: (Charge Hose) 5/16 Flare
- Connection Port Diameter: (Manifold kit body) 5/16 flare
- Coolant: R410A, R32
- Gauge Diameter (Φmm): 80
- Material (Hose): NBR
- Mounting Screw: 1/8NPT
- Normal Pressure (MPa): 5.5
- Purpose: For R410A/R32 Refrigerant
-
-
- FUSO 3/8inch Charge Hose (R410A, R32, R407C, R404A, R134A, R507A)Deskripsi:Very soft and safe high pressure resistant 4-layer structure Good-year GY5 is a charge hose that is less affected by ultraviolet rays and does not easily discolor.atribut:
- Color: Yellow
- Connector Diameter: 3/8F female x 3/8F female
- Corresponding refrigerant type: R410A, R407C, R404A, R134a, R507A, R32
- Hose Length (m): 1.5
- Tasco Charging ValveDeskripsi:Prevents gases from blowing out of both ends of the charging hose and the unit when the charging hose is disconnected. Enables you to open/close the valve at the hose edge.Connection Caliber (male flare x female flare): 5/16 x 5/16atribut:
- Charging Valve Length (mm): 56
- ASADA Manifold KitDeskripsi:-Forged aluminum body that is excellent in strength and durability.-With built-in sight glass, checking flow of refrigerant and the state of refrigerant during filling and recovery are possible. -Manifold AF main body-1/4 charging hose 92cmx3-Caseatribut:
- Gauge Diameter (mm): 80
- Material: Aluminium, Brass, Resin
- Connector Diameter: 5/16 flare (UNF1/2-20 mountain)
- High Pressure Gauge (MPa): -0.1 to 5.5
- Included Accessories: Case
- Low Pressure Compound Meter (MPa): -0.1 to 3.5
- Set Content: Ball valve type manifold body, 5/16 charging hose 92cm x 3, case
-
- SKF NU ECML/C3 Type Single Row Cylindrical Roller BearingsDeskripsi:Single row cylindrical roller bearings are designed to accommodate high radial loads in combination with high speeds. Having two integral flanges on the outer ring and no flanges on the inner ring, NU design bearings can accommodate axial displacement in both directions. An important feature is the separable design, which facilitates mounting and enables the bearing components to be interchanged.atribut:
- Coating: Without
- Bore Type: Cylindrical
- Sealing: Without
- Radial Internal Clearance: C3
- Lubricant: None
- Locating Feature, Bearing Outer Ring: None
- Loose Flange: None
- Number of Flanges, Outer Ring: 2
- YELLOW JACKET Electronic Torque WrenchDeskripsi:These standard-head electronic torque wrenches provide a precise torque reading on a digital display and have audio and visual cues to indicate when the desired torque is reached and if the fastener has been overtorqued. Wrenches measure turning force electronically for high accuracy compared to analog torque wrenches.atribut:
- UNSPSC: 27111715
- Calibration Certificate Included: No
- Clockwise Accuracy: ±2% CW
- Color: Black; Blue
- Corrosion Resistant: No
- Counterclockwise Accuracy: ±3% CCW
- Drive Size (inch): 3/8
- Finish: Chrome
- Handle Type: Anti-Slip
- Head Type: Standard
- Insulated: No
- Material: Alloy Steel
- Maximum Torque (ft-lbs): 62.7
- Measurement Type: SAE
- Minimum Torque (ft-lbs): 3.1
- Non-Sparking: No
- Overall Length (inch): 10 1/2
- Overall Length (mm): 266.7
- Overall Width (inch): 3
- Power Source: (1) AAA Battery
- Ratcheting: No
- Rotation: Clockwise and Counterclockwise
- Torque Adjustability: Adjustable
- Torque Measurement Type: Centimeter-Kilogram; Foot-Pound; Inch-Pound; Newton-Meter
- Torque Range (N m): 4.2 to 85
- Torque Range (ft-lbs): 3.1 to 62.7
- Torque Range (in-lbs): 37 to 752
- Visual/Audible Indicators: Audible and Visual
- YELLOW JACKET Manifold Gauge SetsDeskripsi:Mechanical manifold gauge sets test, evacuate, and charge refrigeration and A/C systems. Also referred to as manifold gauges, they have high and low side dial pressure gauges on a manifold with a hanging hook.
-
- monotaro Manifold Kit For R134A With HoseDeskripsi:For R134a car air conditionersatribut:
- Material (Hose): 3 layers of inner pipe NBR (special rubber for refrigerant gas) + nylon + outer pipe NBR
- Hose Length (mm): About 1410
- Dimensions (Width W x Height H) (mm): 170×225
- Pressure gauge (kPa): 0-3400 (high pressure side)
- Included Accessories: Charge hose (red (M12 x 1.75), blue, yellow (M10 x 1.5) x 1 each), service can valve 1, quick joint (red, blue x 1 each), storage case 1
- Material (Main Unit): (Manifold) Aluminium, (Fitting) Brass
- Gauge Diameter (Φmm): 80
- Compound meter (kPa): -100 to 1700 (low pressure side)
- Refrigerant Used: R134a
- OSG Taper Thread Gauge Ring For Pipes Onlyatribut:
- Size: PT1 / 2
- EDP No.: 38542
- Number of Mountains: 14
- YELLOW JACKET Plumbing & HVAC Tool SetDeskripsi:Plumbing maintenance tool sets include tools to cut and debur pipe, grip and turn pipe fittings and fasteners, or perform other plumbing-related work.atribut:
- UNSPSC: 31160000
- Cutting Tools Included: (1) Pipe Cutter
- Miscellaneous Tools Included: (7) Bending Mandrels
- Plumbing Tools Included: (1) Pipe Reamer(1) Tube Bender Set
- Tool Families Included: Miscellaneous Tools
- Tool Storage Type: Tool Case
- YELLOW JACKET Interchangeable Head Torque WrenchDeskripsi:Interchangeable-head torque wrench kits have a combination of interchangeable torque wrenches and torque wrench heads organized into one kit. They ensure that fasteners are tightened correctly and reduce the need for multiple torque wrenches.atribut:
- UNSPSC: 27111715
- Calibration Certificate Included: Yes
- Clockwise Accuracy: +/-4%
- Corrosion Resistant: No
- Counterclockwise Accuracy: +/-4%
- Drive Size (mm): 16; 17; 21; 22; 24; 26; 27; 29
- Extended Data Testing: Yes; BS EN 26789, ISO 6789, ASME B107.14M, DIN 3122
- Finish: Powder Coated
- Handle Color: Black
- Handle Type: Ergonomic
- Insulated: No
- Material: Aluminium
- Measurement Type: SAE
- Overall Length (inch): 16
- Overall Width (inch): 1 1/2
- Primary Scale Max. Torque (ft-lbs): 59
- Primary Scale Minimum Torque (ft-lbs): 7
- Primary Scale Range (ft/lbs): 7.4 to 59
- Ratcheting: No
- Reversing: No
- Rotation: Clockwise and Counterclockwise
- Secondary Scale Maximum Torque (N m): 80
- Secondary Scale Minimum Torque (N m): 10
- Secondary Scale Range (N m): 10 to 80
- Standards: ASME B107.14M, BSEN 26789, ISO 6789, DIN3122
- Torque Adjustability: Adjustable
- Torque Increments: 0.5 ft-lb; 0.5 N-m
- Torque Measurement Type: Foot-Pound, Newton-Meter
- Torque Range: 10 N-m to 80 N-m; 7 ft-lb to 59 ft-lb
- Torque Setting: Adjustable
- Visual/Audible Indicators: Audible Click
-
-
- CP Brass Manifold Gauge SetDeskripsi:Fungsi dari manifold gauge adalah untuk mengukur tekan negatif maupun tekanan positif dan digunakan untuk memperbaiki pendingan pada AC atau kulkas.
Daftar Harga refco Terbaru September 2025
| Refco Digital Vacuum Presure Gauge | Rp9.999.900 |
| Refco Bourdon Type Gauge | Rp479.900 |
| monotaro Manifold Kit For R410A (With Hose) | Rp1.699.900 |
| KARCHER HOME & GARDEN Pembersih Bertekanan Tinggi | Rp1.799.900 |
| JTC Cold Light Service Manifold Set | Rp4.399.900 |
| FUSO 3/8inch Charge Hose (R410A, R32, R407C, R404A, R134A, R507A) | Rp1.199.900 |
| Tasco Charging Valve | Rp939.900 |
| ASADA Manifold Kit | Rp5.099.900 |
| Kennedy Flaring Tool Kit With Pipe Cutter | Rp1.399.900 |
| SKF NU ECML/C3 Type Single Row Cylindrical Roller Bearings | Rp2.099.900 |
Data diperbarui pada 05/09/2025 (Harga belum termasuk PPN)
Buka WhatsApp