Beli insize di monotaro.id

Digital Caliper (Standard Model)- Buttons: on/off, zero, mm/inch- Automatic power off, move the digital unit to turn on power - Data output- Made of stainless steel

These threaded ring gauges are used to check and inspect coarse and fine internal metric threads. Individual Go or No-Go gauge members are available separately or as sets with both Go and No-Go gauge members.

- Supplied with manufacturer inspection certificate

Made of alloy steel. Meet ISO 3650.Gage blocks ≥125mm have clamping holes.Supplied with manufacturer inspection certificate.

Jangka Sorong:- Skala opsional: 0,02mm, 0,02mm/0,001 Inci, 0,05mm- Dengan thumb knob- Sesuai dengan standar DIN862, monoblok, terbuat dari hardened stainless steel, permukaan skala berlapis krom satin- Round depth rod opsional- Titanium platedbeam opsional - Dikemas dalam kantong kulit atau kotak plastik

- Graduation 0.01 mm/0.0001 Inch- Carbide measuring faces- Meet DIN863- Supplied with setting standard ( expect 0-25mm/0-1 Inch)

These thread pitch gauges measure different screw pitch types in both standard and metric units. A screw or threaded part or fastener is checked against the leaves of the gauge until a leaf that matches the screw pitch is found. These gauges are used for woodworking and general light and heavy machining applications.

- Resolution : 0.01mm/0.0005; - Button : on/off, zero, mm/inch; - Made of stainless steel; - Battery CR2032; - Automatic power off, move the digital unit to turn on power; - Measure height difference of two surfaces (1146-20B, 11446-20BWL suitable for surfaces with barrier, such as rivet)

Button function: on/off, inch/mm, zero, data preset, change measuring direction, absolute/incremental measurement0-6hours automatic power off time can be setSwitchable high/low frequency measurement mode, high frequency mode is suitable for high speed moving of spindle and has large power consumption in low frequency modeKeep preset data in memory after restartCR2032 battery, automatic power offData OutputOptional accessory: data output cable (code 7315-50M, 7302-40M, 7305-40M), backs (page 176-177), contact points (page 173-175)

- Resolution : 0.01mm/0.0005"; - Button function : on/off, zero, mm/inch, ABS, data preset; - Battery CR2032; Made of stainless steel

These digital 3-point micrometers are IP-rated for use on shop floors where dust, debris, water, coolant, and other fluids are present and may pose a contamination risk. Select micrometers have SPC output capability.

- Standard ISO1502; - Supplied with manufacturer inispection certificate