%20%26%20Pengelasan/Lem%2C%20Bahan%20Perbaikan/Lem%20Industri/untuk%20Konstruksi/ALTECO%20Primer%20for%20Difficult-to-Adhesive/quP106147966-1.jpg)
How to use :
(1) Remove dirt and oil on the surface to be bonded.
(2) Impregnate the gauze and the like, and apply the adhesive surface to rub for about 2 to 3 times. Alternatively, it is painted on the adhesive surface with a brush.
(3) After drying, the instantaneous adhesive is applied to one side of the adhesive surface into a point, linear shape, and bonded and fixed immediately.
(4) It will be stationary about 30 minutes until it reaches practical strength.
ALTECO Primer for Difficult-to-Adhesive
#Grup produk P106147966
Spesifikasi
| Adhesive Materials | PP/PE, soft PVC |
|---|---|
| Attribute of The Hazardous | Water soluble |
| Open time (hour) | 12 |
| Quantity of The Hazardous (ml) | 250 |
| Name of The Hazardous | Primary petroleum |
| Classification of the Hazardous | Class 4 |
| Appearance | Colorless transparent liquid |
| Hazardous Class | II |
| Main Component | acetone |
| Main application | PP, PE, POM, EPDM, flexible PVC, TPO, nylon, etc. |
| Peel Strength (N/25mm) | Polyethylene/5, polypropylene/340, EPDM/20, flexible PVC/60 |
| Specific Gravity | 0.79 |
| Suitable For | Pp, pe, pom, epdm, flexible salt, tpo, nylon |
| Tensile Shear Strength (N/mm²) | Polyethylene / 4, polypropylene / 4, EPDM / 1, flexible PVC / 2 |
Pilih jenis produk yang diinginkan
| Nomor SKU | Model Number | Masa Persiapan Barang | Harga | Jumlah |
|---|---|---|---|---|
| Loading... | ||||
Apakah produk dengan spesifikasi yang Anda inginkan belum tersedia? Hubungi tim Layanan Pelanggan kami di sini
Informasi Produk
Description
Feature
Pretreatment agent for superglueBy pre-treating difficult-to-adhesive materials, the adhesive strength is increased.
Use
For bonding difficult-to-adhere materials such as PP, PE, POM, EPDM, soft PVC, TPO, nylon, etc.Ulasan Produk
Tidak ada ulasan
Buka WhatsApp